Category Archives: Car modeling

Top 5 car modeling tips for making your plastic model car

Building a model car kit is a great hobby. If you are a car enthusiast you can take your passion to another level by building these cars. It needs patience and some skills to do it. You need a good amount of detail and accuracy. Car modeling is a very challenging job. But the result is very rewarding. Here are some car modeling tips that can help you.

Tools needed

You need lots of small tools for the modeling work. First of all, you need safety glasses because you will be using paint, sprays and other things. Sandpaper is needed to smoothen the plastic and to take off that extra glue. You need tweezers to hold the small car parts. Paint, paint brushes, glues, cutting pliers, turntables, pins, toothpicks, etc. are also essential.

Structure

You should follow the instructions written on the kit to build the structure. You should first fit all the car parts before applying glue. This is because if you apply glue and you find that the parts are incorrectly placed then it will be hard to take them off. You should use very little glue and apply them using toothpick or pin. If you use too much glue, it will be visible from the outside. You should make sure that all the parts are well-aligned.

Painting

You should apply paint with a fine-tipped brush. When applying airbrush you should set it to low setting. You should tape areas that are exposed to paint. After the paint dries off you can take off the tapes. The lamps are very difficult to paint. It requires great precision. After painting, you should apply modeling wax for polishing.

Creating carbon pattern

You should use properly sized mesh and gray color for painting. If you use airbrush then you should set to low setting. You can add smoke to the carbon pattern to get a more realistic look.

Applying decals and markings

It can be fun applying decals and markings. You will find decal sheets in some kits. You should follow the instructions to apply it.

With car modeling kit you can customize your model. These kits are usually partially built. You just need to complete it. With some effort, you can make it look like the cars you see in shops. In order to make the model look more realistic, you should get rid of any gaps between parts and make sure that the paint is smooth.

7 things you should know about driving through roundabouts

If you want to be a good driver, you should practice. There are some roads where it is difficult to drive. Roundabouts are one of those. Even an expert driver will have a tough time going through it. You may find roundabouts in many sizes. These circular junctions let traffic keep moving without stopping. The traffic travels in a clockwise direction from right to left. As a driver, you should know the following things about driving through roundabouts.

  1. The thumb rule is that you should give way to the traffic that is on your immediate right when you are on a roundabout. When you approach a roundabout you must check your mirror to see the traffic behind you and signal your intended direction.
  2. When you want to turn left towards the first exit on a roundabout, you should first position your car on the left. You should move slowly so that you can stop if necessary. You should give way to the traffic that is on the roundabout.
  3. If you are going straight you need not give any signal. You should keep left this time as well. After you pass the first exit, you should signal left.
  4. For turning right at a roundabout, you should check the mirrors on the right and signal towards the right. You should position your car in the right lane of the roundabout.
  5. Before turning to your desired exit you should check your mirrors and then signal left. You should be careful not to hit any pedestrian before moving towards your exit.
  6. You must know that the cyclists use the outer lane of the roundabouts. So, you should be careful and give them a lot of room when you are on a roundabout.
  7. When you are on a roundabout with multiple lanes, you should choose your lane appropriately. If your exit is on the left then choose the left lane, if it is on the right then choose the right lane. If you want to go straight ahead then choose the center lane. Some of these roundabouts have traffic signals to guide you through the proper lanes.

It can be confusing driving through roundabouts. If you don’t know the proper driving rules, you may cause accidents. So, learning these rules is very important. You should always check your mirrors before making a turn and be careful not to hit any other car on the roundabout.

Infographic by: visual.ly